Jump to content

Andrew at MEA

  • Posts

  • Joined

  • Last visited

  • Days Won


Everything posted by Andrew at MEA

  1. ‘Straight-Up’ with the IoT. A new year has fired up at MEA and the troops have rested. I wish I could have rested, but with MEA closed over the Christmas-New Year period, I inevitably spent that down-time reading up on all those technologies I’d sidelined in my head amidst the daily blur. This year I got up to speed on the latest ultrasonic technologies for level sensing, just in case we set about marrying Myriota’s remote-area satellite IoT technology with tank level monitoring and sensing cattle movements. And it’s been hot ‘Down Under’, so the Christmas break also found me conducting a large-scale study in the MEA Test Garden on the impact of current-collapse in our IoT solar panels at temperatures above 40°C. To complicate things, the summer sun climbs high into the sky during the summer solstice, with shorter charging days for north-facing solar panels exacerbating solar-battery charging difficulties caused by radiant heat load. January and the return to work saw us hosing down last-minute alarms in our new Bluetooth-gypsum block IoT technology, destined for shipment to some remote tropical island off Australia’s north-east coast where the Green Turtles are breeding. Things that shouldn’t have gone wrong did go wrong. The ADCs and direct memory access functions in our MSP430 embedded controllers didn’t work as either the data sheet or Errata notes suggested they ought. Occasional data gaps were appearing in the logged record because measurements didn’t complete. We fixed this with a re-write using basic code and much cursing. Then the outdoor air temperature hit 46.9°C (116.4F) in the MEA Test Garden in Adelaide – with over 52°C inside the enclosures – and suddenly we had data spikes. That last-minute glitch was also hosed down and we entered production. With all that done, we got back to debugging our Myriota satellite IoT test system, which had stopped transmitting following a rain event. That too got sorted, teaching us yet again that one can’t be careless with enclosures even when hacking stuff together to test first principles. February rolled around and we dug deep into our back pockets for intellectual property – hardware and firmware – to lash the Myriota modem to our newly-developed smart gypsum block interface. Sometimes it’s good not to be a start-up, as there is no need to develop every darn thing from scratch before you can get down to business. Test beds evolve quickly. Six weeks into the New Year in the MEA Test Garden and we’re monitoring the soil moisture tension profile in the orchard and beaming data straight-up to those whizzing satellites that pass overhead twice-a-day. We’ve already learnt that we can send eight 20-byte packets by queuing them and letting the Myriota modem tackle the business of attempting multiple packet transmissions at each pass. This will stop-gap us against otherwise poor sampling rates until more satellites are launched. Once again we find ourselves under time pressure. Does this satellite IoT technology really work as expected? Can we reliably design product around it? Where are the pitfalls? Can we compress the data sufficiently to match the very small payload? How do we connect data across from the Myriota server to MEA's Green Brain in the cloud? Only squads of data – and time to collect it – can help us here, and we need all sorts of weather events to shake loose nasty gremlins that will surely bight us if they get through to production and our customer base. In the meantime, my Christmas sabbatical has fired my imagination and I’m spending the wee morning hours in my home lab testing new sensor ideas. There just never seems to be enough time in this IoT race!
  2. Hi Geoff Yep - exciting times, indeed. We've had ours since last year and have been transmitting data from the MEA roof via satellite about four times per day since then. I can hardly believe it's possible! And so many interesting applications opening up for IoT (truly-) anywhere... The Myriota applications team have been quick and helpful sorting out bugs and queries. All the best with your developments. Cheers for now Andrew
  3. Another Christmas in IoT Land Weariness pervades all as another working year winds down here at MEA. With the pressure to release new IoT products and the need to shore up the ravages of Mother Nature among the old ones, it’s been a tough year in Product Development. We learnt this year to prototype and manufacture in China, speeding up PCB manufacture while driving costs down in a competitive arena. In 2018 we designed and built a Bluetooth logger for SDI-12 digital sensors, then immediately set to work on a specialized version capable for making AC resistance measurements in gypsum blocks (a simple 78-year-old soil moisture tension sensor technology that we’ve sold by the tens of thousands into Australian agriculture). We finished that gypsum block logger only this morning (just hours short of our close-of-business); we already have orders for a whole raft of them in the New Year. Test jigs and the business of building production lines was a mixed bag in 2018; we’re going to have to start that process earlier in the product development cycle and allocate a greater portion of resources to it. Next year we’ll do better. Our Green Brain web app for farmers passed a billion records in 2018 and boasted over 99.8% up-time and a 90% customer retention rate. Google Analytics tells us that most irrigators with our gear are hitting up their Green Brain account on a daily basis. Adelaide-based Myriota have progressed their satellite IoT technology to the point where they released their software development kit (SDK) in November 2018. Within weeks of purchasing ours we’d established a link via satellite from the rooftop at MEA via the Internet back to MEA. Next year we’ll turn that ground-breaking IoT technology into practical agricultural applications. In my own small corner of MEA’s engineering world I’ve completed my three-decade effort to build a crop-water stress (CWS) sensor for use in horticultural crops. These self-contained solar-powered instruments make use of all that new 2018-technology for data logging with Bluetooth data pickup. In the wee morning hours, I’ve also solved the sensor insertion issues needed to bury the tiny probe into the xylem tissue of vines and trees. The prototype CWS sensor has run flawlessly for two solid months in a grapevine in the MEA Test Garden. The production run of the first 25 operational units ran smoothly. As part of that CWS instrument design we created a sensor shelter to house the vapour-pressure deficit sensor. This specially-shaped nylon housing costs under $60, was designed by MEA’s mechanical engineer and manufactured in Brisbane in less than a week on a HP Jet Fusion 3D-printer. Commercially, 2018 was a hard year for us at MEA as we transitioned to second and even third generation products – this effort absorbed huge portions of our profitability but kept us in the marketplace. There’s no standing still in IoT land. However, help was at hand from the Australian Federal Government – in November 2018 MEA learnt that we had been awarded an ‘Accelerating Commercialisation Grant’ to build a new generation of on-farm IoT products. That will be the job in 2019-2020. With the official MEA year at an end, I’ll be heading home shortly to drink a beer on the back porch and look out over the MEA Test Garden where I spend my engineering down-time growing things. This garden is the secret sauce behind my working life in irrigated agriculture, just as my remote hillsides at Pine Hut Knob were the secret sauce behind the field measurements in wind and solar energy that fueled MEA’s early decades. It’s inside this huge garden that I will begin the shakedown testing of the crop water stress sensors over the Christmas-New Year period and into 2019. Just like the CWS sensor, my tree crops and vines represent decades of patient cultivation - avocados, figs, almonds, oranges, lemons, grapefruit and mandarins, bananas, mulberries, plums, peaches, nectarines, wine and table grapes, apples and pears, kiwi fruits and passionfruit – all the trial crops surround me, and my home lab stands in the middle. There’s plenty of scope in my own back yard for a quick and broad test of the CWS technology across a whole gamut of horticultural crops. So where will I be over the holiday season? Hovering anxiously over all these new sensors in my garden, nurturing and mothering and brooding away, willing all this magic to sing in unison for the greater good. And keeping a close eye on my irrigation through the heat of an Australian summer…
  4. It's all happening Down-Under; three Aussie companies have launched four satellites for IoT connectivity in the past few weeks. https://www.theage.com.au/national/how-a-tiny-box-attached-to-a-cow-s-ear-is-making-waves-in-space-20181205-p50kas.html
  5. Last week, Adelaide startup Fleet Space Technologies launched its Proxima I and II CubeSats from New Zealand, marking the company’s first commercial satellite launch and laying the foundation for free global connectivity for the industrial Internet of Things (IoT). https://www.createdigital.org.au/adelaide-startups-cubesat-launch-is-an-australian-first/?utm_source=ExactTarget&utm_medium=email&utm_campaign=EDM-20181120 This story appeared in createdigital - an Engineers Australia eNewsletter
  6. Producing the IoT I’m a self-confessed ‘data-sheet junky’. This is an inexpensive and innocuous habit, allowing me to indulge in circuit daydreams at odd moments while the digital whiz-kids are struggling with coding and software and Internet issues. Many hundreds of data sheets sit quietly on my phone and are backed up in the Cloud, weighing nothing, costing nothing, crammed with applications information and a free education in how to build things with electronics. These data sheets keep my dream of being an electronics engineer alive while I do my day job in the IoT business. In the past four months – since official product launch of our latest on-farm IoT product – MEA has been running field trials with live customers, testing phone apps on every conceivable Android and iOS device and generally getting beat-up as per usual. While all that has been going on a whole new engineering project has been underway: construction of the production line. No IoT product development has been completed until you’ve built the programming and test jigs and are churning out stock to load the shelves. Boxes and boxes of built-up circuit boards arrive from remote PCB factories and pile up on the incoming stock shelves. Our operations manager hovers nervously on the fringes of the engineering team, waiting for the gun to go off. Designing the product is only half the game; the second half is running every device through electrical tests, charging batteries and load-testing them, loading firmware into various on-board microcontrollers, testing Bluetooth and other comms channels, reading sensors, milking out those all-important identifying MAC addresses, logging them and printing labels then storing test results to our server. Then there’s documentation, staff training and meshing-in all those other manufactured components such as enclosures, packaging and ancillary items. We’re building low-cost volume IoT products, so this whole production process has to be automated and run by any kid old enough to serve hamburgers. Profit margins are slim as we compete in this over-hyped and over-heated world where the final arbiter of success is a signed purchase order, positive cash flow and a light service load. Our product development team is a small enclosed world demanding high skill levels and intense concentration. Upstairs is a very different reality; our marketing folk are trying to get the knots out of the customer experience, simplifying the creation of Green Brain accounts and the downloading of the Retrieve app that runs our latest Bluetooth loggers and connects sensors and loggers through phones to our Green Brain database in the Cloud. Endless talking, phone calls, stress, tweaks to Green Brain operations – just the usual daily round while management tries to keep the MEA ship on an even keel and the books balanced. So that’s the scene around me. Except my mind is off wandering, scouting ahead to the next generation of products that will one day create an internal furor of their own. I’ve come up with a cunning new circuit for solving the Yamartino formula in the measurement of wind direction for newer faster MEA weather stations. I need a PWM-to-DAC converter and I just know I’ve got a data sheet for that somewhere…
  7. Constipation in the IoT In his best-selling book “The HP Way: How Bill Hewlett and I Built Our Company”, David Packard provides insights into managing and motivating people and inspiration for would-be entrepreneurs. [The following two paragraphs are an extract from the cover notes…] “From a one-car-garage company to a multibillion-dollar industry, the rise of Hewlett-Packard is an extraordinary tale of vision, innovation and hard work. Conceived in 1939, Hewlett-Packard earned success not only as a result of its engineering know-how and cutting-edge product ideas, but also because of the unique management style it developed – a way of doing things called 'the HP way'. Decades before today's creative management trends, Hewlett–Packard invented such strategies as 'walk–around management', 'flextime', and 'quality cycles'. Always sensitive to the needs of its customers and responsive to employee input, Hewlett-Packard earned massive steady growth that far outshone its competitors' vacillating fortunes, even with radically different products from those responsible for its initial boom.” Yet the pearl for me in reading The HP-Way was some advice given to Dave Packard in the company’s early formative years by an older bank manager, that more companies die of constipation than starvation. The great difficulty of being a player in the Internet of Things arena is the sheer diversity of skill-sets required to implement a useful solution to a customer’s problem. Further, one runs the risk of vacillating to a stand-still, because there are simply too many possible choices to be made between competing sensors, networks, software packages and so on. The particular area causing constipation in MEA’s product development cycle at the moment is in choosing a network operator. When MEA launched its Plexus sensor networks in 2013, choices were few and an on-farm ZigBee network feeding a 3G/4G on-site backhaul made plenty of sense if we wished to provide a one-shop solution. Similarly, there was a dearth of folk who understood cloud-based data-bases and web applications, so we created Green Brain ourselves. We weren’t even sure if mobile phones were going to be sufficiently ubiquitous to allow farmers to view their data from anywhere at any time. (Indeed, we were still creating our own Magpie PC-based data logging software at launch date) And this was only five years ago! Since then, all sorts of folk have made massive investments in parallel network developments designed specifically for the IoT; Sigfox, Taggle, Lo-Ra Wan, Myriota and Fleet Systems just to name a handful. So, from being a provider of our own network solutions, MEA is now spoiled-for-choice with low-cost carriers all anxious for us to feed our data transmissions through their gateways, locking us in to finding and billing customers while the network providers bill us. This new model – of using alternate carriers to Telstra – has plenty going for it in terms of manufacturing and transmission costs, but comes with an uncertainty in coverage. We wind up wanting to build solutions for all of them. (And indeed, they are anxious for us to do so). Constipation indeed! While I was trying to get all this sorted, Green Brain passed the one billion record mark. Perhaps the lesson to be drawn from all this is that one must simply continue to adapt one’s business model to the current technological status quo, and to be fleet-of-foot about it. The Hewlett-Packard model shows that this can be done, while listening to customers and employees at the same time.
  8. The IoT and the Sensor Black-Hole MEA’s IoT product development road-map is pretty well laid out for the next two years: new CAT-M1, Myriota satellite and Sigfox network cores will connect third-party sensors to MEA’s Green Brain web-app. This in addition to our existing Plexus long-range ZigBee on-farm networks and the new Green Brain loggers with their Bluetooth to 3G/4G hop through farmers’ mobile phones. And of course, there’s always our GDots at the really bottom-end of our product spectrum for farmers replacing IoT technology with human gray matter. This all makes perfect sense from a company perspective, but I find myself off yawning in a corner, quite rightly leaving all the young bucks to work their digital magic. The IoT scenery – so mysterious just a few years ago – has become mundane. Lots of excitement still as the brawls develop in the race to create the networks that will carry all the data from billions of sensors but – yawn – the electronics design challenge has disappeared. Just connect a few wires from sensors to the IoT module and step back while the firmware/software boys step forward to do the real product development. I nailed all the solar-battery stuff years ago, so even that’s not around to interest me anymore. In the marketplace, more and more folk are coming out of the woodwork with a piece of the IoT jigsaw puzzle in their hand, looking for folk with matching pieces. Data analysis folk are looking for databases to work on. Software companies with databases are looking for system integrators to feed them data. System integrators are looking for network modules and network operators to carry their data to the software folk. Sensor manufacturers are looking for system integrators to snap up their offerings and solve the real-world installation issues. Everyone’s looking for customers, agents, distributors or investors/buyers. Yawn. With the IoT dust settling, I’m increasingly conscious of a black-hole appearing in my peripheral vision. Where will all the new sensors come from to interface the stubbornly analog world to this burgeoning digital world? Four decades of studying and using sensors has shown me that this is an area growing at a snail’s pace by comparison to the stellar developments in the digital sphere. New stuff appears only rarely, and then its rather more an adaption of older ideas using newer processes, or is far too expensive to match the low-cost devices in the digital arena. Sadly, analogue electronics is barely taught any longer at under-graduate level and its practitioners – such as myself – are ageing and increasingly sidelined in a digital world. Sure, there are sensors available for most of the regular tasks that can feed the IoT networks, but there are plenty of instances of poor-fits between what we have and what is needed in new applications. Sensor technology then is fertile ground for feeding the ravenous appetites predicted for upstream IoT technologies. Just a few more IoT products to knock out over the coming two years and I’ll be off to the home lab to think about weird and wonderful sensors to solve all those old intractable measurement problems. We analogue engineers are well-suited for just that sort of work. And the technology needed to build and test working circuits is all available for a song on eBay. I’ll happily leave the digital wars for a new generation to fight, while I focus on doing what I love – electronic sensor design. Analogue home labs – like mine – are well-suited to tackle future sensor droughts in the burgeoning IoT era
  9. A ‘BeeTLE’ in the IoT Yippee! – no more USB cables to connect into our IoT devices to set them up! Our new measurement and data logging core – code-named the ‘BeeTLE’ during product development – uses a Blue Tooth Low Energy (BTLE) radio link instead. This is a non-trivial step forward in field measurements, because connectors are the weak-points in field enclosures. At 2.4GHz, enclosure walls are transparent to communications while remaining opaque to rain, sun, dust and wildlife. Similarly, the need for robust portable field computers has finally disappeared; mobile phones – already Bluetooth and 3G/4G enabled ­ – and custom apps pick up that load. For the past five months MEA’s product development focus has been on the development of the simplest possible and lowest-cost IoT device that could read our range of on-farm sensors. This BeeTLE core would be the fundamental logging platform from which future products would step off as we add LPWAN, CAT-M1, NB-IoT and satellite backhaul links. For the moment though, BeeTLEs need only human legs + smart phones + nimble fingers + modest intellect to go out there to fetch data. Data logging fills in the measurement gaps between visits, and the irrigator trades off his travel time against the convenience and higher capital cost of always-on IoT telemetry systems. There are no network Hubs or Gateways needed; the user has those in his pocket in the shape of his mobile phone. Telstra and their ilk provide the longer back-haul of data and send him the bill for those services. Green Brain – MEA’s existing database and farmer web app in the Cloud – provides all the long-term data storage. Once new data is uploaded from a BeeTLE through the mobile phone to Green Brain, graphical data all comes back down over the Internet to the same smart phone for data display. The devil is – of course – in the detail. What happens when the measurement site is out of 3G/4G coverage? (Answer: Unloading takes place normally between BeeTLE and phone, with data stored in the phone’s memory. Upload and data display happen automatically once the farmer returns within range of either Telstra or his home/office Wi-Fi system) Can multiple users – the farmer and his workers – unload the same BeeTLE? (Answer: Yes. Green Brain tracks and automatically synchronises phones and incoming data) And so on and so forth. Good software engineering ensures that the whole process is seamless and ultra-simple for the user, despite lots of clever stuff being needed behind the scenes to cope with all the edge cases. But what’s the really cool thing about Blue Tooth connectivity? The Beetle – now called a ‘GBLogger’ because its powered by Green Brain – needs no On-Off switch! If connectors are a pain, access to power switches elevates that enclosure vulnerability to a whole new level. But no switch is needed; the entire product runs on less than 25µA of current, allowing the GBLogger’s batteries to be loaded and sealed in at the factory with years of shelf life ahead. And Australian aircraft now allow ‘gate-to-gate’ usage of such low-power BT devices, so GBLoggers can be shipped by air while continuing to advertise their readiness to start logging at a moment’s notice. Figure 1 This simple MEA circuit board is at the heart of a battery-powered, Bluetooth-enabled smart-sensor and Green Brain-enabled data logger for the simplest possible MEA on-farm IoT platform
  10. The IoT and the Iron Triangle The Christmas break was over and – in mid-January of this year – we regrouped here at MEA to figure out what our next product offering would be. Across the table from the engineering team sat our management and marketing folk who – for some reason – were looking us rather sternly in the eye. “Now” – said our MD – “we don’t set product development time-lines to meet market-launch opportunities but we need new product to go on show at the Irrigation Australia International Conference-Exhibition in Sydney between the 13th-15th June 2018” And so, it all began again… As engineering director, my job is to look blithely unconcerned at these times and to prevent panic breaking out among the younger engineers. Five months, to go from a clean sheet of paper to working prototypes that will utilize new technology across all the diversity of skill sets that form MEA’s IoT product development team – electronics, PCB layout, firmware phone app and web app developers, mechanical engineering and industrial design, manufacturing, packaging and all the usual interplay with our marketing, sales, operations and service people. Not to mention our suppliers… As engineering director, I don’t get to do anything specific in the way of design work anymore, but I’m expected to be across every facet of this IoT ‘sprint’ to an immovable goal post. So, I make use of the ‘Iron Triangle of Product Development’. This rule-of-thumb states that you have to continually make decisions between Quality, Cost and Time-to-Market. But you only get to choose two out of three, because they are all in their way mutually exclusive. What the rule doesn’t say is that different segments of the project get different mixes of choice. Sometime I’ll choose Quality and Speed at some additional production Cost. At other times I need to sacrifice Quality to Time-to-Market and lower Cost. And so on and so forth, literally on a daily basis. So, on this past Tuesday (June 12th, 2018) our marketing team flew into Sydney from Adelaide and Queensland with the expected new product good to launch. True, we only finished firmware a week ago, the phone app half a week ago, and a brand-new version of Green Brain just two days before. And we had to pull a few swifties by 3D-printing new parts of the enclosures rather than the more time-consuming business of creating injection-moulding tools. We took the risky step of prototyping PCB and early-production run PCB assemblies in China for the first time, because local manufacturers are not well set up for rapid and inexpensive prototyping. And we kind of skimmed over the extended field trials, relying on 35 years of data logging and field experience to direct our in-house testing. So, we made it, thanks to a deep well of company experience and rapid prototyping techniques. No doubt next week we’ll be getting the stern eye once again, and we’ll limp once more to the starting blocks.
  11. ON Semiconductor have introduced a range of IoT wireless sensors for measuring temperature, moisture, pressure and proximity that are battery-free and microcontroller-free—using standard protocols. https://www.allaboutcircuits.com/industry-articles/the-rundown-of-on-semiconductors-smart-passive-sensors-sps-for-the-iot/
  12. The IoT and some Ancient History It was the winter of 1988 and I was shivering with fright in a garage attached to a rented house wherein my wife and three preschool sons awaited whatever bread I could put on the table. I’d completed my work on the South Australian Wind Energy Survey (1984-1987); I’d been contracted to make wind and solar measurements at over thirty sites across the state, logging the data and analysing it on the first IBM PC computer blitzing along at 4.7 MHz. This marvel of cutting-edge technology had two 8-inch floppy drives but no hard drive, no telemetry and a bulky monochrome display. Mechanical printers were slow and noisy. Home-made data analysis software had to be written in BASIC. The Internet was a term and a technology yet to be dreamt of. Renewable energy In South Australia died as soon as the Government-sponsored Wind Survey was completed in 1987. It simply had no traction at all with our electrical authorities who – frankly – had no intention of taking that ‘hippy technology’ any further while there was still plenty of coal to be mined at Leigh Creek in the State’s far north. All those wind measurements gained me a Master’s Degree in Electronic Engineering, but I was now seriously out on my own, sitting at a battered wooden desk with a second-hand kerosene heater as the only source of warmth. Measurement Engineering Australia (MEA) was underway and I was now a pioneer in the brave new world of desktop computing, environmental sensors and data logging. [No grandiose visions of sales outside my home state led me to add ‘Australia’ onto the company name: I just didn’t want to spend the rest of my working life talking about ‘ME’] 1987: Renewable energy and the IoT arrive simultaneously in South Australia, although nobody knew it at the time. At about that time, a long skinny German PhD student set out from the warmth of a European summer to fly down to Australia to start his doctoral studies in agriculture in South Australia. Pretty soon he’d found his way to my lab and we set out together to measure the growth rate of oranges on the Loxton Research Station. ‘Plant-based measurements’ had arrived. Once all this remote measurement gear had been set up in the Loxton research orchard the data coming back showed a remarkable sensitivity to crop water stress. How could I reproduce these measurements in crops that didn’t have oranges hanging off them? So began a thirty-year odyssey to develop a sensor so sensitive that it would allow the plants to do the talking: not the soil, not the atmosphere – the plants! Along the way I studied both ancient and modern circuits, went back to the basics of my craft, studied endlessly through weekends, nights and annual leave and gained a PhD and a Dean’s Commendation. I gave lectures in Europe to scientific audiences, wrote papers for international journals, ran field trials of the sensor in Australian vineyards and analysed the results. I began to see a way forward. All this from the kitchen table, for although I now had a larger desk at MEA there was little time or budget available for such a long-term endeavour. I’d set out to create a ‘new-to-world’ sensor and wound up with a superb education in analog and digital electronics. Three decades have passed and I’m still not at product launch. But I do have a few secret weapons. Down the backyard is my home lab, put together through careful shopping on eBay for second-hand instruments. It is here – during more evenings, weekends and annual leave – that I gained ground that would have been impossible among the distractions of my daily rounds as MEA’s Engineering Director. Data logging and desk-top computing have transmogrified into the Internet of Things, and I’ve become an old dog who understands all that stuff. I’m surrounded by the finest technicians, engineers, marketing, management and operations people who cover off on those skills I don’t have. The business infrastructure is solid. I’ve had decades to learn about viticulture and horticulture at first hand. Plexus routinely carry soil moisture and climate data and deliver it to farmers via MEA’s Green Brain. Best of all, the Internet of Things now spoils me for choice, just as I find myself looking to launch this new crop water stress sensor. Should I choose satellite, Bluetooth, narrow-band or CAT-M1 cellular IoT technologies or the ultra-narrowband Sigfox network? Nothing frightens me anymore; I can put my hand to any combination of these technologies to deliver plant-based measurements to Green Brain and farmers. Wind and solar energy took off in South Australia big-time in the early 2000’s, driven by commercial interest and new players in the energy market. MEA was well-positioned to grow with that wave. We instrumented over three hundred wind monitoring systems across Australia, many of which now host massive wind farms. Likewise, with solar monitoring. Funds from my first outing as a pioneer were reinvested in the development of Plexus and Green Brain IoT technologies for agriculture. And that long skinny PhD student of long ago got over the academic line and returned to Germany as Doctor Braun, now Professor Braun. That small task he left me – to improve on methods of making plant-based measurements – has blown out to become the swan-song of a long engineering career. But at least the IoT is now here to allow me to connect it all up…
  13. http://myriota.com/myriota-closes-series-a-funding-round/
  14. Hi Heath I'd be happy to give a talk about on-farm IoT if that would interest your group. July would suit me. Best regards Andrew at MEA
  15. A Litmus Test for the IoT Thanks for your kind words, Tim The modern conundrum is that there are two audiences in this IoT hype cycle; those seeking funds who are targeting investors, and those building real systems targeting farmers with gear that must work and be supported on-farm for at least a decade. It’s taken me a long time to figure out a way to differentiate between the two. The former is characterized by new players who see agriculture as a ripe field for new IoT products. These folks seem to be acting under the old British legal mechanism known as ‘Terra Nullius’ which sees Australian agriculture as ‘an empty land’ available for plunder. The fact that there is a rich history of trial and error, success and failure by long-standing companies in this arena is simply brushed aside, or goes unrecognized as an inconvenient truth. This is possible because both startups and investors are equally ignorant of the deep ground truths that make agriculture such a difficult place to make a living. The second class of citizen are those who have been in the game for a long period and know just how hard this business is. It’s not simply that equipment is beaten up by Acts of God, Mother Nature, animals, lightning and rogue humans on farm machinery, but that farmers are both a practical and sceptical bunch; they have been parasitised by every salesperson on the planet. Farmers don’t read web sites then buy the glitz; they find out from fellow farmers which suppliers are cutting the mustard in looking after them in the long haul and offering value. They have sheds full of stuff that didn’t work! You can recognize the real players by their bruises and their reluctance to skite about how terrific they are. They know where the bodies lie. Any success is hard-won. In short, nobody gets credence with me in the game unless they’ve been through a long period of on-farm humiliation. This takes years of tenacious effort, toe-to-toe with farmers and their agents, making stuff work and fixing what doesn’t. Your case study telling of Taggle’s reasons for getting out of the agriculture market pretty much makes my point. So, hoping 2018 is a good year for you too, Tim. You and Geoff Sizer have done much for Australia's engineering community by the creation of this forum.
  16. Old Dogs and the IoT It’s been a year of the utmost tedium: MEA versus Mother Nature in the ‘Valley of Death’. Done and dusted. Our Green Brain now holds ¾ billion climate and soil moisture records and this grows at about a dozen new records every second. Plexus ‘ZigBee’ + 3G telemetry delivers IoT data from over 4000 sites. Farmers can access their data at any time, from anywhere. The MEA production line and service department are likewise approaching calm and stability. We’ve got the bugs out of many things. But from every angle I’m still being told that “the true role of an IoT startup is to EXIT!” Under this modern business model, my job would be to carry the cash to the bank and to let the new buyer pick up all the loose ends of first IoT product release. It would be up to the new company to go through the hard slog of creating real value, brand loyalty, jobs and channels to market and service. ‘Old school’ – on the other hand – strives for the paradox of product stability and a sustainable business. You can’t be sustainable if you don’t obsolete your stable old products and battle through the Valley of Death after product launch to stabilise the new ones. Since MEA first launched modern on-farm IoT product in 2013 there has been an explosion of technology, hype and competition. Therefore, the race continues: we’ve learnt that no single IoT solution fits all farms. Once again, we are creating a new startup within an old company. On the drawing board are not one – but four – modern IoT technologies that will spring forth to plug the gaps in our product spectrum and our competitors’ muzzles. And what can I conclude from all this? Simply that general-purpose ‘measurement engineering’ – a discipline I invented for myself 34 years ago to describe what I did for a living – is a pretty good fit to the modern IoT.
  17. Gentlemen Thanks for the interesting update on the Telstra IoT network switch-on. We've been waiting for this news. Sadly for us, our modem supplier (Sierra Wireless) won't release matching LTE Cat-M1 hardware until some time in 2018. So sadly, no-way we can put all this to the test. I wonder if the pricing models reflect the much smaller payloads the IoT will be using?
  18. The Long Tail of the IoT Some days I just want to run and hide! For 42 years I’ve been engineering measurement technology for mining, renewable energy, climate and agricultural applications. And time and again I’ve been whipped by the long tail of in-field product failures. Is it just that I’m crap at this stuff? It’s tempting to think this way when our marketing staff are throwing rocks through my window, customers are ringing in with reports of equipment outages, agents are threatening insurrection and our manufacturers and suppliers stiff us with dicky mouldings, sensors or PCBs. I have only one answer at these times, and that’s to keep my trap shut and begin the long business of grinding down problems that arise, one at a time, and to hope that MEA can survive in business until the current crisis is forgotten in the rear-view mirror. Do all these kids forecasting a rosy future for themselves ‘in the IoT space’ have any idea at all what it’s like on the other side of product launch? Because that’s when one starts down the long tail of product support and maintenance… A third major Australian competitor of ours collapsed this past year, with the remnants of their technology sold off to an overseas concern, local staff laid off and all customers abandoned. Many smaller ones have come and gone over the past few decades. Two of these three companies were backed by tens of millions of dollars in investment funds. They got through to product launch before in-field issues stared to bite and profit levels failed to rise to lift the company before investor cash burn ceased. Maybe life’s easier for those IoT developers sheltered inside Smart Cities? But somehow, I doubt it. MEA is now five years down the track from our very first commercial installation of an on-farm IoT ZigBee sensor network (we still hadn’t got the connection to the cloud working back then – all data landed on the farm PC) Week after week for all those intervening years we’ve been working to shore up our technology and processes that showed weaknesses under a real-world hammering. No victory can ever be declared, simply because no marketplace or technology is ever permanent. As Winston Churchill put it: “If you're going through hell, keep going.”
  19. The IoT and the Startup Mirage Hardly a week goes by without a brand-new Startup trumpeting their claims to vast IoT territories that I’ve so laboriously trudged across these past few decades - all with the vast expenditure of technical and marketing effort and the humiliation of field failures. Sexy websites show groups of attractive and happy young people all holding slim notebook computers or sitting in front of modern terminals in airy bright atrium work spaces - all this far removed from the cluttered bench space of our working engineers and the reality of a manufacturing facility. A quick scan of the startup's Board Members shows some pretty high-flying suits, no doubt moving through rarefied circles well beyond my ken while collecting salaries far exceeding my own hard-earned stipend. The very occasional Case Study of a field deployment mentioned on these web sites trumpets only Success, dressed up to look like a massive product rollout that’s taken a grateful market by storm. Ringing around the marketplace throws a harsher light on these systems; they are often merely preliminary trial units on free-loan to potential customers, rather than working systems sold after winning over skeptical farmers. Look under the News tab on these web sites and you’ll find photos of company executives in black tie and tails at Award ceremonies, being congratulated on their tremendous growth (potential). Perhaps the final indignity is the ready cash showering down – investors seem to flock to startups, while companies demonstrating organic growth, sound management, field-proven products, job creation, customer loyalty, a high level of support and routes to market stand ignored on the sidelines. Totally flummoxed by all this modern-day smoke and mirrors, I sought a non-engineering perspective. I tried to follow the resulting explanation – I really did! The bottom line seems to be that I’m a troglodyte mired in the perception that the best indication of market success is a signed purchase order and positive cash flow. That it’s not about what you can design and sell, but about selling yourself and your startup’s ‘disruptive potential’ to groups of investors (gamblers?) based on a storyboard of your trajectory to becoming the next Google, Apple, Amazon or Tesla. So I’m left trying to find some small crumbs of comfort amidst a tidal-wave of media releases suggesting that our end is nigh. Perhaps I’ll just ignore all the clamour and stick to my knitting, leaving the passage of time rather than the world-wide-web to make the final judgement call on who really succeeded in making something out of the IoT.
  20. Nice video of the difference between point-to-point and mesh-networked radios; thanks for posting.
  21. http://myriota.com/myriota-wins-best-new-business-sa-telstra-business-awards/ South Australian satellite-based IoT company Myriota is becoming "recognised for turning clever technology into a successful business”
  22. The IoT and Life in the Cloud The Internet of Things is intimately married to the Internet and its (actually ground-based) Cloud Computing. This whole centralized on-farm software has freed MEA from the tyranny of PC-based data presentation with all its upgrade issues, computer obsolescence, software on CDs and web-sites, and the constant need to cope with changing Windows operating systems. With Cloud-based computing, we have a single web-application to maintain on a single server (someplace) in the Cloud. Serving all our users simultaneously... Yet with these new freedoms come new responsibilities; one small slip and we have hundreds of users howling at our door. Where’s our data!!!??? And so, this whole business of cloud-computing is one of constant vigilance, late night panics, server and Internet outages and the usual costly upgrades to ensure that we are using the very latest web and graphics software tools. All this without even thinking too hard about security, backups and Acts of God. MEA’s Green Brain web app - and the Plexus IoT on-farm hardware feeding it - celebrate five years from launch in early August this year. The number of users has risen from one or two Early Adopters to hundreds of irrigators spread right across the map of Australia’s arable landscapes. We’ve been working recently to connect MEA’s regional weather station networks to Green Brain; more useful data for farmers, yet a widening of MEA’s responsibility to the general farming community to keep this whole complex technical structure up and operating. Green Brain’s data base now holds a non-trivial half-billion records and is growing apace. So the question must be asked: “Have we created a monster or a valuable tool?” And the answer might well be that we don’t know, because the game’s still on and we keep juggling the difficulties, making small wins, discovering weaknesses and endlessly tweaking our way out of them. In fact, just doing what MEA has been doing since I founded the company in 1984 – getting environmental data back from the Australian bush.
  23. Thanks Tim - a scary post, indeed. Putting aside the $90,000 fine on that one non-compliant product/company, the FCC is essentially stating that it has the power to ban a product or manufacturer from the US market for ever! I've talked elsewhere on this forum about the very high cost of gaining FCC and CE compliance certification ('The IoT and Electro-Magnetic Compliance') The hidden sting in the IoT tail is that one cannot count for protection upon the US radio manufacturer's own FCC compliance statements*; you have to undertake full IoT product compliance yourself. In Australia, this will set you back about three months and nearly $20,000. This is one of the arguments for using radio 'modules' - as opposed to chips sets - in your IoT product design. The module will carry its own EMC compliance certificate, at the expense of a large impost in price once you start to manufacture in quantities. * we found that Texas Instrument's ZigBee 'system-on-chip' radios breached the allowable FCC noise levels in the 2.4 GHz side-bands, effectively shutting us out of the US market until we fitted band-pass filters to the Plexus radio transmitters.
  24. One Australian company with commercial IoT product in the market is Taggle: http://www.taggle.com.au/ I had a visit from their Chief Product Officer - Marc Englaro - earlier this week and took some notes as he responded to my questions: - Taggle offer their own networks targeted at water utilities for water metering and rainfall measurements. Taggle's systems are largely based within towns and cities, allowing them to deploy their own hubs and control their own network roll-outs Taggle sell their radios for water meter transmitter for <$100 each in large quantities (the sort of numbers used by utilities). Taggle's radios operate on the 920MHz ISM band, using one-way transmissions Data cost per site is under $1 per month. The primary cell battery will last about as long as the water meter. Range is typically 5 kms. Taggle have put these out onto about 40 000 water meters made by an Australian company out of Melbourne Taggle’s technology arises from CSIRO spin-offs by the rf group that invented Wi-Fi Taggle have reached 25 Australian utilities, most recently SA Water under their Smart City program. All errors and omissions are mine in this reporting
  25. South Australian company recognised at major international IoT Summit South Australian IoT company, Myriota, has been awarded Best Industrial IoT Start Up Company at the world’s largest IoT summit, held in Silicon Valley. Myriota was one of over 100 start up companies from around the globe, who pitched to a panel of Silicon Valley and International IoT experts at Internet of Things World 2017. Myriota has developed a low power, low cost, satellite IoT communications platform, making transmission of small data from remote locations economically viable for a whole new class of sensors and machines. See the full story here: http://myriota.com/myriota-wins-at-iot-summit/
  • Create New...